What? A complete digital control for under $400 ??? YEP! The ACC ePACK Is a 120/240 smart digital controller/heater that will operate a single pump, blower(or 2and pump), ozone and a light. This is a complete package that includes an LED digital spa side control, with programmable functions, and equipment cords. The Smartouch ePack features full automation for bringing your spa 'up-to-date'. ACC was the first in this industry, to introduce digital controls in 1981. They've earned a great reputation not only as a leader but a leader with staying power.
This controller is normally for a spa that has TWO pumps, and a blower, or three pumps.
Note: If you have a single pump and blower system, then you should check out the SB-1000 Control System and save some money.
It requires 230 Volts with Neutral to operate. The AP-1400 spa system incorporates a replaceable 5.5KW heater element, and is 6 pin spa side and ozonator ready.
This system, as pictured includes a 1.5 HP two speed spa pump, 1.0 HP blower, light kit... the works.
NEED PARTS FOR THIS PRODUCT CLICK ANY OF THE BELOW PARTS!!! HEATER ELEMENT PRESSURE SWITCH MAIN CONTACTOR HEATER/PUMP CONTACTOR TIME CLOCK SELECTOR SWITCH THERMOSTAT HI-LIMIT TAILPIECES SPLIT-NUTS TOPSIDE CONTROL AIR BUTTON PUMP AIR SWITCH BLOWER/LIGHT AIR SWITCH
A 2 pump, blower, and ozone digital spa control system from Applied Computer Controls. ACC was the first in this industry, introducing digital controls in 1981. This is a complete package that includes an LED digital spa side control, with programmable functions, and equipment cords. The Smartouch 2000 features full automation for bringing your spa 'up-to-date'.
NEED PARTS FOR THIS PRODUCT CLICK ANY OF THE BELOW PARTS!!! HEATER ELEMENT PRESSURE SWITCH MAIN CONTACTOR CIRCUIT BOARD TOPSIDE CONTROL TAILPIECES SPLIT-NUTS FUSES
This unit also replaces Hercules Compu-Sybaritic Spa Control Systems.
Attention Morgan Spa Owners! - If you've got a black box digital system with a long stainless flow-thru heater, this unit is a direct drop in replacement for your spa control system - Replacement is fast and easy, less than 2 hours from start to finish!
This is a custom configured spa controller to replace systems that have really expensive circuit boards and heaters that are mounted away from the control box. This unit will handle up to a 6,000 watt heater.
With many of these in use today, it just makes sense to replace an old expensive system with a new controller and topside panel that costs about as much as a circuit board.
You have a few options with this control, with or without the heater cable. In a lot of existing spa control installations, you will have a heater tube, with a flexible conduit running from the heater connections all the way to the spa control. To install on the Smart Touch Digital, simply attach the two existing heater power wires to the indicated locations inside.
The temperature and high limit sensors will mount in the same locations on your existing heater. Standard length is 7 feet. You can even use your existing pressure or flow switch - it also comes with a 7 foot cable length.
Remember, this unit comes with NO HEATER - it uses your existing heater.
This way you don't have to replumb your existing system, simply connect the temperature and high limit sensors where your old ones are, connect your flow or pressure switch.
The Dependable Smart Touch Digital Spa Control is our favorite! It is usable as a 120 or 240 volt system.
It reliably controls one 2 speed pump, a second single speed pump, a THIRD single speed pump or blower. It has a light recepticle and is Ozone ready. It can also utilize a small circ pump operating 24/7.
The off board heater contactor is one of the features of the ACC control and In our opinion is what maintains its reliability. ACC was the first in this industry, introducing digital controls in 1981. Unlike others they remain a strong player and build an excellent reliable digital spa controller. This is a complete package that includes an LED digital spa side control, with programmable functions, and all equipment cords. The Smartouch 1000 features full automation for bringing your spa 'up-to-date'.
Note: Please call us to ensure compatiblity with your existing heater and plumbing.
The EM-190 replacement control Pak will replace many old Brett Aqualine control systems, including old-style EM/CM 190 control boxes. The current unit is an air acuated control system, any old-style digital system will require a new topside to go with it. Any EM-190 will operate on either 120V or 240V with the exception of the 2-Pump model (240V only). All systems include a 120V ozone receptacle and a receptacle for a 120V topside. the 2HP model also includes a secondary pump receptacle (240V) for a single speed booster pump.
1
Note: Prices and Specifications subject to change without notice
