The Hydro-Quip Universal CS6000 series controls represents the finest in classic Electro Mechanical dependabilty. The durabilty of the components used in mechanical controls is legendary and Hydro-Quip spares no expense at equipping their controls with the best available.

From the ease of installation to inclusion of the exclusive Visual Diagnostic System to aid in trouble shooting you will be glad you made the “Smart Choice” and chose to equip your hot tub with a system manufactured by Hydro-Quip: the industries oldest and most trusted supplier.

This is the replacement for the older CS600 T and HT600.

ELECTRICAL INPUT SPECIFICATION:
SINGLE PHASE
120/240VAC
50/60HZ
ELECTRICAL OUTPUT SPECIFICATION:
CIRCUIT(S) MAXIMUM AMPS
PUMP 13A
BLOWER 8A
OZONE 2A
CIRCULATION PUMP 5A
12 LIGHT 1A
HEATER 23A
TOTAL SYSTEM LOAD MUST NOT EXCEED 50FLA @ 240VAC

Product Description

Product Features

• New! VDS Visual Diagnostic System™

"Light is Right!" No light means faulty circuit

• New! Molded/colored receptacles

• New! Molded/lighted cords

• Universal 2-speed pump circuit w/48" cord

• Universal air blower circuit w/48" cord

• Spaside control receptacle

• Spaside control Panel (34-0197)

• 12 volt light with 96" lead

• Stainless steel heater housing

 • High limit protected heater

• Universal ozone circuit w/48" cord

• 1.375/5.5kW, 120/240 volt heater operation

• 1 year parts warranty

• Wall and foot mount brackets

• UL and ETL recognized

Control Box Measurements

12 3/8"Wx7 1/8"Hx4 1/4D plus 2" for the heater box attached to the Stainless steel canister (see other product images)

Spaside Measurements

Top Outer Diameter 7"x3 1/4"

Hole Size 6"x2 1/2"

Uses high flow stainless steel 5.5 or 11kw heater.

Gas heater option also available.

Outdoor weathertight construction for use with inground or aboveground installation.

Self-contained (no remote sensors) makes for an easy installation. Spa-side digital panel 25ft (included). Spa light-ready (12v or 120v). Ozone/sanitizer ready. Air blower circuit (240v only). System power control switch. Uses 2' plumbing connections. Easy electrical access. Includes installation and operation guide. UL/ETL listed. 3years parts warranty direct from HydroQuip.

Note: Shipping costs on this complete package can be excessive depending upon your location relative to the factory. To get an accurate quote please call us and we'll be happy to assist you.

	Dimensions: 35" wide, 25" tall, 18" deep. (Shown with optional DynaMax Pump) This unit comes in two boxes direct from the manufacturer and can be assembled on site. Complete assembly and instruction manuals are included.
The ES8000 Hydroquip system is available with your choice of heater and pump sizes! Comes complete with 8 button topside control panel with a 25 foot cord. The pump you can select either the Sta-Rite Dura-Jet spa pump (flooded suction only) , or upgrade to the ultra reliable Sta-Rite Dynamax pump, complete with strainer as pictured in the larger image to the right.
If your unit is sitting lower than the spa base suction and within 15-20 feet of the spa, then you may be able to select the Dura Jet pump that appears here. It's a bit smaller than the DynaMax, but just as capable within good range of the spa and when the suction is always full of water.
This is the system control panel for the air control version, it includes a thermostat, timer, and high limit switch.  The digital version is controlled via the topside control panel.