This is a complete system with a two speed pump, blower, cord and air switch for a second pump. It also includes a 12 volt spa light kit. This controller is normally for a spa that has TWO pumps, and a blower, or three pumps.
Note: If you have a single pump and blower system, then you should check out the SB-1000 Control System and save some money.
It requires 230 Volts with Neutral to operate. The AP-1400 spa system incorporates a replaceable 5.5KW heater element, and is 6 pin spa side and ozonator ready.
This system, as pictured includes a 1.5 HP two speed spa pump, 1.0 HP blower, light kit... the works.
Simply slide under the spa, connect power, suction hose, discharge hose, blower hose.. then with 3 air buttons, you're up and running. NEED PARTS FOR THIS PRODUCT CLICK ANY OF THE BELOW PARTS!!! HEATER ELEMENT PRESSURE SWITCH MAIN CONTACTOR HEATER/PUMP CONTACTOR TIME CLOCK SELECTOR SWITCH THERMOSTAT HI-LIMIT TAILPIECES SPLIT-NUTS TOPSIDE CONTROL AIR BUTTON PUMP AIR SWITCH BLOWER/LIGHT AIR SWITCH