Product Description
The WUA400-2/6 is on an extended back order and we don't have an ETA for its arrival. We recommend using the standard WUA400-II model. The difference between the two is the low speed amps are 3.4 amps higher and have a slighly higher rpm on the standard version. You can find that model pump here: LX WUA400-II Pump Assembly, 56 Fr, 4.0 HP, 230 Volt, 2 Speed
- NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II also there are variations as the the wet end union size.. There is a 2" x 2" , 2' x 2 1/2" and 2 1/2" x 2 1/2".. Make sure you know your confirguartion before ordering..
THIS PUMP IS A 2" X 2" Meaing it measures about 3" Edge to Edge across the threads on the wet end..
This is a rare pump.. 4 HP LX Spa Pump 2 Speed 230V 56WUA400-2/6Features
- Eliminates the need for a separate circulation pump and plumbing.
- Runs at lower RPM (1150) resulting in cooler running temps, longer pump life and lower consumption.
- NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II
**Pump & motor manufacturers reserve the right to change motors on pumps or style of motor without notice. Motors shown may differ from current stocked product. Functionality remains the same**
Additional Information
| Cord Type | NONE |
| Voltage | 230 |
| Horsepower | 4 |
| Discharge Location | Side |
| Discharge Size | 2" MBT |
| Frame Size | LX56 |
| Number of Speeds | 1 |
| Frequency (Hz) | 60 |
| High Speed (Amp) | 12 |
| Lo Speed (Amp) | 1 |
NOTE: This Pump looks a lot like an Aqua-Flo and a CMP Pump and they will interchange if you replace the entire pump!
If your original Wet End has a Bleeder Barb and the heads of the Bleeder Screws in your old wet end have a spot for a flat screw driver you will need a new bleeder barb... If the original has a wing nut style you already have the newer style bleeder barb and will only need a new one if your original one breaks..
Click this link for the new Style Bleeder Barb: Barbed Bleeder Plug WUA Intertek LX 48 or 56 Frame Wet End Fine Threads
