Manifold Hot Tub Spa Part 24 3/4" Outlets with Coupler Kit Video How To
This is an example of the 3/4" Tubing on a Manifold with a clamp..
This is an example of the coupler and clamps being used to connect the old tubing with new..
This kit features 3/4" ID Tubing to extend your original plumbing..
The 2" Piece of pipe measures 2 3/8" OD..
The 2" Flex Pipe is 6" Long..
The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
The manifold featured in this kit is Closed on one end the other end receives a 2" Pipe or fitting that would measure 2 3/8" OD..
The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
The manifold featured in this kit is Open on both ends.. One end receives a 2" Pipe or fitting that would measure 2 3/8" OD and on the other end glues inside of a 2" fitting that would measure 2 3/8" Inside Diameter..
This coupler is used to connect the old 2” Pipe to the new Manifolds..
This coupler is used to connect the old 2” Pipe to the new Manifolds..
The couplers are 3/4" OD used to glue inside of 3/4" Vinyl tubing..
The couplers are 3/4" OD used to glue inside of 3/4" Vinyl tubing..
Manifold Hot Tub Spa Part (24) 3/4" Outlets with Coupler Kit Video How To
This part is a Kit with (4) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs Manifolds and a Coupler Kit.
The Kit consists of (4) Manifolds total, (4) with (6) 3/4" Barbs totaling 24 Outputs with (5) Plugs so you could make the barb count be 23,22,21,20 or 19, a 2" Coupler, 6" of 2" Soft Pipe, (48) 3/4" Clamps and 72" of Clear 3/4" Tube so you have about 3" per extension.
The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there.
The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side.
