Product Description
This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (2) Jet Pumps or (1) Jet Pump and a Blower, (1) Circ Pump if equipped, and Ozonator and a Light.
It comes with the pack which includes a Board, Heater and Tube and Sensors, a 4 Button Litre Duplex Topside, a Light wire and bulb Kit needed to operate the items the system will run.
Note: If you have a circ pump system it must move more than 30 gallon per minute to operate the M7 system.
Added Note: There are a lot of circ systems that do not move more than 30GPM therefore if you have a circ system we recommend a system that uses a Pressure Switch not an M7 system.
When you purchase a Retrofit Kit from us you will have access to call us when installing for advice that is part of your purchase.
This complete retrofit spa pack VS-501 that can be hooked up 120/240V
Amp Cables Not Included..
Overall dimensions are 11" Tall x 15" Wide x 4-1/2" Deep
Retrofit Kit 54220-Z Includes:
- 5.5kW heater with Balboa's patented M7 technology (no pressure switches)
- Spa Control System
- Panel Model - Lite Duplex Panel Dimensions (in) 6.32 x 2.25, Panel Dimensions (cm) - 16.05 x 5.72
- Adapter Bezel Blackout plate 8 9/16" long X 3 1/2" Wide
- Other Parts Included - one LED light assembly ih Cable
- 2 speed pump (120V/240V)
- 1 speed pump (240V) or Blower (120V/240V)
- Ozone Generator (120V/240V)
- Spa Light (12V/12W)
Replaces failure-prone mechanical pressure/flow switch
Can be plumbed to either suction or pressure side of pump
120/240V convertible power
Custom plastic enclosure
M7 flow/ temperature sensors
Rigorously tested
US & Canadian safety approvals
• 120V / 240V Circ Pump*
* = Ozone and Circ Pump must be same voltage.