Product Description
Genuine Aqua-Flo Flo-Master XP2e 56 frame Pump Assembly in 3.0 HP, with 2 speed motor. Built with efficiency and power in mind - This pump assembly is designed for today's larger spas that require greater flow rates to support more jets and power. XP2e runs at a higher flow rate but with less operating cost than it's competitors. This equates to energy $avings!
If you are replacing an XP2 56 frame pump in a Sundance or other brand spa and your wetend has a 6.1" diameter, then you may need to make some plumbing alterations as this new replacement XP2e version has a 6.3" diameter wetend.
XP2e Features:
- 3.0 HP
- 230 Volt
- 12.0 / 4.4 Amps
- Wetend adjustable to one of three positions
- 2" intake and discharge fittings (3" thread diameter)
- Replaces all single speed versions - Just wire up high speed!
AKA/Replaces: 05330002-1300, 05330002-2, 05330002-2040, 05330002-2300, 05330002-2340, 05330306-1340, 05330309-2300, 05330883-2300, 05334001-2, 05334001-2300 , 05334002-7300, 05334003-2300, 05334004-2340, 05334004-7040, 05334005-2340, 05334006-7040, 05334007-2300, 05334008-7300, 05334009-2340, 05334010-1340, 05334011-2300, 05725794-7040, 05730000-2340, 05734000-2340, 05734001-2361, 05734002-2000, 05734002-2300, 05734003-7361, 05734004-5340, 05734004-7340, 05734005-7300, 05825000-2340, 05825001-2, 05825001-2340, 05825002-2040, 05825002-2340, 05825003-2340, 05825004-2000, 05825004-2300, 05825004-2340, 05825004-2381, 05825005-2040, 05825005-2340, 05825006-2340 , 05825007-2000, 05825007-2300, 05825008-2300, AQF-10-467, PRC3094X, PRC505, PRC9093X, PRC9094X, PUM22000842, PUM22000916, PUM22000941, R63MWENA-4727, TT505
Please Note: If your horsepower marking has SPL next to it (example:4.5 SPL, 5.0 SPL), then you have the uprated horsepower, not the true continuous which is determined by the amps and volts. If you need a hand finding the proper cord or horsepower ratings, please don't hesitate to call our technical support team!
IMPORTANT MOTOR VARIATION NOTICE
Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.
If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.
Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.
