Product Description
Jacuzzi J-Series Wet End Kit
Bottom Suction, center discharge, 2"mjt, 48 frame wet end by Jacuzzi/Carvin. This wet end is used with a 1.0hp, 48 frame, thru-bolt style motor. The motor used may be either a single or dual speed. The complete wet end includes: the volute, seal, impeller, wear ring, volute o-ring, faceplate and faceplate screws. Assembly Required. Motor and unions sold separately.
Note: This Wet End Threads measure about the same as a standard 2" Union but notice the beveled edge instead of a flat fitting edge... If You order the associated union for a Standard wet end it will not work.. Inversly if you order a standard union for this type of wet end it will not work even though they measure really close to the same...
Pump to Motor Foot Types | 13 |
Motor Frame | 48 Frame Thru-Bolt |
Drain Plug Location | None |
Suction Auxillary Port | None |
Suction Style | Bottom |
Suction Connection (Physical Dimension) | 2-15/16" od |
Suction Connection Type | Male Jacuzzi Thread (mjt) |
Suction Pipe Size | 1-1/2" |
Discharge Auxilary Port | None |
Discharge Style | Center |
Discharge Connection (Physical Dimension) | 2-15/16" od |
Discharge Connection Type | Male Jacuzzi Thread (mjt) |
Discharge Pipe Size | 1-1/2" |
Horsepower | 1.0hp |
Manufacturer | Jacuzzi/Carvin |
Pump Model | J Series |
Manufacturer Impeller Number | 05386305R |
Volute Fastening Type | 4 Bolts |
Volute/Sealplate Number | 02-1308-05R |