Product Description
This Kit is an ACC Smart Touch E-Pac LF with low flow heater Set Up. The heater on this unit is
used with spas that have a low flow circulation pump such as a Laing or Grundfos pump. This unit will control a 2 speed primary pump, a single speed blower or a single speed secondary pump, ozonator, circulation pump, and a 12 volt light.
The topside is 5 3/8" x 2 1/2" on the face and the hole size for the topside would be about 4 3/4" x 1 3/4".. If the hole you are trying to use the topside is is larger than this we offer blackout plates to take up the space here: Adapter Blackout Plate, Hydro-Quip 8-1/2" x 3-1/2". For Eco-401 or Balboa E4 Duplex Topside
The ePack LF includes complete control system, 15" heater tube with 3/4" Barb Connections that screw on each end - One 90 Degree and One Straight 3/4" Barb, topside control panel, and all cords
The factory default settings are:
230v 4-wire incoming power
230v to heater
115v to pump
115v to air blower or second pump
12v to light
115v output for an accessory, ozonator, etc.