Product Description
Our Side Discharge 230 Volt Circulation Pump is a perfectly matched combination of Motor and Pump for your spa. This circulation pump has 1.5" unions which measure 2-3/8" across the male threads and an adjustable wetend to meet various plumbing types. This circ pump is what we consider a high flow style and is suitable for spas that utilize sensors instead of a pressure switch and need a higher gpm (gallons per minute). In most cases this pump is running 24/7, providing a light circulation and consistent filtration in your spa.
Can be used as a replacement for many brands of spas and hot tub, but we have listed some common applications below.
2006-2008 Pilates H2O Spas - XP1, XP2, XP3
2006-2008 Freestyle Spas - 1301 Veneto, 1302 Tuscany, 1303 Roma, 1304 Sicilia, 1305 Amore
2006-2008 La-Z-Boy Limited Spas - 1304 and 1801 models
2006-2008 - Platinum Hot Tubs - The legend, Platinum I and Platinum II
2008 + Premium Leisure / Sterling Leisure - XP1, XP2, Passion, Essence, Desire, Pure, Pristine.
Hydro Spa - Mark III Series (All Years) - Solaris, Millennium, Omni, Stratus, Tiara, Lexxus, LX74
| Accessory Pump Type | Circulation |
| Manufacturer | AquaFlo/Gecko |
| Speed | 1 Speed (RPM 1725) |
| Motor Voltage | 230v |
| Motor Amperage | 0.9A |
| Drain Plug Location | 3,6,9 o`clock |
| Suction Style | Center |
| Suction Connection Type | Female Pipe Thread (fpt), Male Buttress Thread (mbt) |
| Suction Pipe Size | 1-1/2" |
| Discharge Style | Side |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 1-1/2" |
| Horsepower | 1/15hp |
| Motor Frame | 48 Frame Thru-Bolt |
| Hertz | 60/50 |
IMPORTANT MOTOR VARIATION NOTICE
Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.
If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.
Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.
