Product Description
Replacement Hot Springs flanged heating element, rated at 1.5KW (1500 Watts) at 115 volts operation. This element is for all Hot Springs Spas from 1980-1994 that where 110/115 Volt models. Easily identified by the 4" x 4" heater flange and center thermowell for your hi-limit probe. Includes the 3 prong J&J power cord, fiber gasket and o-ring.
A Common failure of heating elements are a tripping GFCI breaker. If this part is unplugged and your spa stays on and runs, then this should be the correct part for your repair. Always inspect the receptacle that this element plugs into, to be sure its not melted or deformed. That could indicate a secondary issue.
| Heater Application | Watkins |
| Heater Element Type | Flange, Square |
| Heater Element Connection Size | 4" x 4" |
| Kilowatts | 1.5kW |
| Immersion Length/Depth | 10-3/4" |
| Thermowell Size | 1/4" |
| Voltage | 115v |
| Coating | None |
