Product Description
Waterway Viper Pump 3.0 Impeller exclusively for A Waterway Viper pump which has 2 1/2" inlet and outlet which measures about 3 9/16" across the threads...I have found this 3HP pump impeller to be on a 10amp motor...
This pump uses a different seal than all other Waterway pumps click below for the parts related to this pump:
Closed face impeller made for the Viper pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway Viper pump wetend, and must be installed on a 3.0hp (or greater) thru bolt motor.
Impeller Type Closed Face
Impeller Diameter OD 3-13/16"
Vane Width ID 5/8"
Eye Diameter OD 2-5/8"
Eye Length 3/4"
Impeller Width OD 7/8"
Seal Seat Depth n/a
Shaft Length 1-1/4"
Shaft Diameter OD 5/8"
Seal Seat Diameter OD n/a
Manufacturer Waterway
Pump Application Viper
