Sta-Rite Impellers & Parts

Sta-Rite Pump, New Style Drain Plug, O-Ring, 1/2" ID, 3/32" Cross Section

This O-Ring is used on a Sta-Rite Pump, New Style Drain Plug, O-Ring, 1/2" ID, 3/32" Cross Section  Fits this style of plug only..  This plug is not included in this listing..   If you want the complete plug and O-Ring in this style...

Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

This part is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...

Tool, Die to Thread Chase Pump Motor Shafts American Pumps Only

This Tool is a Die that fits all American made Hot Tub Pump shaft threads.. This fits Hot Tub Pumps only in these brands.. Waterway, Aqua-Flo, Sta-Rite, Vico and Power-Right.. Note: This will NOT for LX Intertek Motor Shaft... 

Impeller, StaRite, DuraJet, DJ, 3.0hp, 12.0 Amps

This part is a 3HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0135 cast into the back and will measure about 4 1/8" wide with an eye width of 1 3/4" and a vane width of 1/2".. This can be found on motors with an...

2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

This O-Ring is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you...

Sundance, Jacuzzi, Thera-Max, Thera-Flo, 2" Flat O-Ring Replacement that is Round..

This O-Ring is a replacement for the Square Gasket that is found in the Sundance, Jacuzzi, Thera-Max, Thera-Flo, 2" Flat Style O-Ring..  Heater Union Part Type    O-RingPart Type    O-RingO Reference Number  ...

(2) Front Bearing & Seal Pump Parts Kit Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal and (2) Bearings that fit most motors that are mated to Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to seal the seal. This Seal is used in Most Vico,...

How To Video Pump Wet End Bleeder Plug Leaking Repair Spa Guy

This video is about The Spa Guy showing How To Repair a Leaking bleeder plug on a Sta-Rite Dura-Jet Pump. it is a similar process on all brands.. Save Save Save

How To Video Pump Slow Start or Hum on Low Speed Repair Spa Guy

This video is about The Spa Guy showing How To Repair a Sta-Rite Dura-Jet Pump that either slow starts or Hums on Low Speed but will run on hgih and then on low after being on high but will not run on low from a dead start... it is a similar process on...

How To Video Replacing a 201 Seal Sta-Rite Pump Repair Spa Guy

This video is about The Spa Guy showing How To Replace a Sta-Rite Dura-Jet Pump 201 seal and face o-ring... it is a similar process on all brands... Save

(1) Front Bearing & Seal Pump Parts Kit Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal and (1) Bearing that fit most motors that are mated to Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to seal the seal. This Seal is used in Most Vico,...

201 Seal Pump Parts Kit with Silicon Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal, Seal Tool and Silicon that fit Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to seal the seal. This Seal is used in Most Vico, Sta-Rite, Dura-Jet...

(2X) Hot Tub Spa 2" Nut Kit & Gasket Pump Union Emergency Repair Video How To

This part is a set of (2) 2" Pump Union Split Nut Repair Kits which includes the split nut, (2) Screws and a T Gasket for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the threaded side and mounts to...

(1X) 2" Split Nut Kit & Gasket Pump Union Emergency Repair Video How To

This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut, (2) Screws and a T Gasket for use with a 2" Pump Union. Special Note: This Nut will not work on J-Pump Wet Ends or Hayward Wet Ends.. The Pump Union Split Nut that...

(2X) Hot Tub Spa 2" Split Nut Kit for Pump Union Emergency Repair Video How To

This part is a Set of (2) 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. Special Note: This Nut will not work on J-Pump Wet Ends or Hayward Wet Ends..  The Pump Union Split Nut that...

How To Video Removing a Stuck Impeller on a Hot Tub Pump Spa Guy

This video is about The Spa Guy showing You How To Remove a Stuck Pump Impeller...This technique is similar for all brands of pumps and motors... Save Save Save Save Save Save Save Save Save Save Save

Shaft Seal, PS-1902, 3/4" Shaft, Silicon Carbide PS-201 (BEST) Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal is a (BEST) Silicon Carbide Salt Resistant Upgraded Version of a PS-201 Seal used Primarily in Vico, Sta-Rite and Power Right Wetends. Silicon Carbide’s exceptional wear and chemical resistance, enhanced dry running capability and high...

Shaft Seal, AS-1521, 3/4" Shaft, Buna-N, PS-201

Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V

This part is an Impeller for a Sta-Rite DuraJet DJ Wet End that would be called 1.0hp-1.5HP, your motor should be 8.0-9.0Amp at 230V or 16.0 Amps at 115V.. The number on the back of the impeller will be 17400-0021 or 17400-0121 if you have a number on...

Impeller, StaRite, DuraJet, DJ, 2.5hp, Amp 11.0-12.0

This part is a 2.5HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0123 cast into the back and will measure about 3 3/4" wide with an eye width of 1 3/4" and a vane width of 1/2".. This can be found on motors with...

Impeller, StaRite, DuraJet, DJ, 2.0hp, 10-11.0 Amps

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a vane width of 1/2".. This can be found on motors with...

Wet End O-Ring 5-1/8" ID, 3/16" Cross Section Sta-Rite Starite Dura-Jet DJ Series

This O-Ring is 5 1/8" Inside Diameter and 3/16" wide and is used in many applications for Wet Ends between the Face and Volute or under a Trap Lid brands include Hayward, PacFab, Pentair, Sta-Rite in these series Dura-Jet DJ Series Wet End Faces, Dynamo,...

Pump Seal PS-3868 Viton Like a PS-201 (Better) Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal Kit PS-3868 Seal is an Upgraded Better Viton Carbon Graphite Version of the PS-201 Seal used Primarily in Vico & Sta-Rite Wetends.It is 1 3/8" Across the back of the Spring Seal part that goes onto the Impeller and the Ceramic & Rubber...

Shaft Seal, PS-201, 3/4" Shaft, Buna Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal is a PS-201 Seal used Primarily in Vico & Sta-Rite Wet Ends..  It is 1 3/8" Across the back of the Spring Seal part that goes onto the Impeller and the Ceramic & Rubber part that goes into the Volute or Wet End Back is 1 3/8"...

Hot Tub Spa 2" Heater or Pump Union Gasket 2 1/2" Lip Balboa Gecko ACC

This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...