Product Description
Gecko In.Yj compact retro-fit control system includes the in.yj spa pack, 4.0 kw remote heater, Pump 1 power cord, light cord, K300 topside control, adapter plate and Ii.Touch WiFi Module. Makes a great control for spas that have a tight equipment area or plumbing. This system is sent with only a direct connect 2 speed pump cord and 12 volt light adapter. The new WiFi module allows you to control the hot tub from an app on your phone (Androind or Phone) Easily mounted via the included mounting bracket to hang the spa pack up high.
Tech Tip: All circuits are convertible to 115 or 230 volts and you can select multiple programming selections through the topside during setup. This system comes default for a 230 Volt input, but the circuits are set for 115. You would move the white wire on each receptacle to the L2 position on the circuit board for a 230V component
Supports: (1) 2 Speed Pump or (2) Single Speed Pumps, Ozonator, Circ Pump (Only works if pump 1 is single speed and with circ no secondary pump available)
Box Dimensions: 12" Length, 3-3/4" Depth, 7-3/8" Height
Yj Features:
- Convertible to 120 or 240 Volt (Incoming voltage and each circuit)
- 15" Flo-thru Heater, 4.0 / 1.0 KW (4000 Watts @ 220V, 1000 Watts @ 110V), 2" unions (measures 3" inside) , 48" power cord
- K300 Digital Topside Control w/ adapter plate - 6-5/16" x 2-1/4"
- IPx5 Waterproof Rating
- In.Touch Wifi Ready (In.Touch Sold Separate)
- Solid State Flo Detection - No more pressure switch to adjust
- Wifi Module is a great way to monitor your spa whan not home from anywhere in the world that has internet
Note: This system includes a cable for a 2 speed pump #1 only that is the direct connect style w/ no plug.
Here is a link to the single speed cords with amp plug for this system: (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
Here is a link to the 2 speed cord with AMP plug: Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 72"Long, Plug Attached, w/Terminated Ends
