JACUZZI® PREMIUM Hot Tub Parts

Jacuzzi® Premium Diverter Handle 2007+ J-300 & J-400 Series Gray Spa Hot Tub

This part is a 4 5/8" Long X 1 7/32" Long Jacuzzi® Premium Spa Diverter Handle part that fits 2007+ J-300 or J-400 Series Spas it is Gray in color. This Diverter handle Slides on the Diverter Valve Stem that measures...

Diverter Valve 4" Kit JACUZZI® Premium Spa Cap & Handle Only Hot Tub

This kit is a Early Style Cap & Handle Only for a 4" Wide JACUZZI® Premium Spa Diverter Valve. This Kit comes with The Cap, Handle Only. The Valve these parts fit is found on JACUZZI® Premium Spas only!!...

Diverter Valve 4" Kit JACUZZI® Premium Spa O-Rings Cap Handle Stem Hot Tub

This kit is a Repair kit for a 4" Wide Capped JACUZZI® Premium J Series 300 and some 400 Model Spa Diverter Valves. This Kit comes with The Cap, Handle, Stem Gate Valve, (2) Small O-Rings and (1) Large O-Ring. The Valve these...

Diverter Valve 4" Kit JACUZZI® Premium Spa O-Rings Cap Handle Hot Tub

This Kit is a Early Style Cap, Handle and O-Ring  kit for a 4" Wide JACUZZI® Premium Spa Diverter Valve. This Kit comes with The Cap, Handle,  (2) Small O-Rings and (1) Large O-Ring. The Valve these parts fit is found...

Spa Hot Tub Diverter Valve O-Ring Kit Jacuzzi® Sundance® O-Rings Standard Kit

This kit is a Jacuzzi® Premium or Sundance Spa Diverter (3) Piece O-Ring Kit only. This Diverter O-Ring Kit Features (2) Small O-Rings that fit on the Stem sealing the inside of the cap and (1) Large O-Ring that seals the outside of the cap and...

Diverter Valve 4" Kit 2007+ JACUZZI® Premium Spa Cap Handle Stem O-Rings Hot Tub

NOTE: Jacuzzi has changed the Stem Gate Style from the original style to one that has a disk at the top edge.. This is designed to lower the water pressure on the cap and prevent leaks and cap issues as well as lessen the chance of blowing the cap off...

Fuse, 4A, 2AG, 14.48mm Clear Glass, Sundance 850

Suction, Return, Wall Fitting, Jacuzzi, Sundance, Wall Fitting & Nut, Main Drain, White

This part is a Suction, Return, Wall Fitting, Jacuzzi, Sundance, Wall Fitting & Nut, Main Drain, White

Heater, Low Flow, Trombone ,Jacuzzi, Premium, Replacement, 230v, 5.5kW

This part is a Complete Trombone Heater that is about 23" X 10" X 15" Squareback 3-Wire with Built in Thermal Cut-Out. Includes Titanium Heater Element and Hi-Limit Disk. This heater fits a lot of different brands of tubs and there is a list below of...

Sensor, Temperature, Jacuzzi J-Series, Sundance, Curled Finger Style

This part is a Temperature Sensor found in some Jacuzzi J-Series and Sundance hot tubs that have Curled Finger Style connector..  See the pictures for the Curley finger style examples to determine if yours is that style.. This sensor...

NLA Impeller, Jacuzzi, Piranha,Thera-Max,Thera-Flo,2hp, Sundance Jacuzzi J Series

This part is now obsolete.. This 2HP Impeller fits a Jacuzzi/Carvin Wet End only and would be found on a motor that is about 16.0 Amps on a 115V motor or 10.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo and is found on...

Sensor Assy, Sundance, 800, Temp, Hi Limit, w/o O-Ring

Pump, Circulation, Laing, E-10, 115v, 3/4" barb

This 115V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diameter  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...

Jacuzzi Premium Filter Cartridge, 2"SAE , 15-1/2" X 6-5/8" J-300 J-400 FC-2800 6CH-960 6540-476

This filter fits Jacuzzi Premium Hot Tubs J-300, J-400 Series. It is 15 1/2" Tall and 6 5/8" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads. There...

Jacuzzi Premium Trap, Debri Attachment Trap, Mesh Skimmer Bag, J-300 Series, 2002+.

This part is a Jacuzzi Spa Trap, Debris Attachment Trap (Mesh Skimmer Bag). Fits most J-300 Series, 2002 and newer and here is a link to the filter fr this tub too Jacuzzi Premium 2002+ Filter Skimmer Bag has 6 holes around the top of the bag, and a 7th...

Pump, Circulation, Laing E-10, 230v, 3/4"b, 4ft Bare Cord

This 230V Laing E-10 pump with a 3/4" Barb Suction and Pressure Side which measures about 3/4" Outside Diameter and the hose is 3/4" Inside Diamater  is compact and lightweight, less than 5 lbs. It is whisper quiet, highly efficient and designed...

O-Ring, 6" ID, 1/8" X Section, Square, Thera-Max, Thera-Flo, Sundance, Jacuzzi, Hotspring

This part is an O-Ring that is a square style.. It fits Piranha "A", Thera-Flo, Thera-Max, Bracketless, all found on Jacuzzi, Sundance, Hotspring and other brands as well...Part Type    Square RingO Reference Number  ...

Flow Switch Sundance Jacuzzi 3/4"MPT with 3/4B x 3/4"B x 3/8"b Tee

This Item is a 3/4" Threaded Flow Switch with Housing that is found in Jacuzzi Premium, Sundance Spas and a Few other Brands. The Housing is 3/4" Barb X 3/4" Barb X 3/8" Barb. Note: Some housings don't have the 3/8" Barb if yours doesn't you need to...

Pump Circulation Grundfos 230v 1" Barb 12-18 GPM New Style

Grundfos Circulating Pump 230V with 1" Barbs... In my opinion this is a better pump than the Laing Brand... Spa Guy Note: If you are using this pump to convert from a Laing you will need this Conversion Kit If you want the same kit but need Glue Click...

Sensor, Temperature, Sundance, 800, Jacuzzi, J-Series, Premium, Box End Style

This part is a Temperature Sensor for some Sundance and Jacuzzi Premium Hot tubs that have the Square Boxed End Style Connector..  This sensor is used with following Sundance systems: 1992 Suncoast, 1996-98 Suntub, 1997-2005 400, 600, 600-S, 750,...

Flow Switch, Sundance Replacement, 3/4" barb, Tee, Box Plug, No Bleeder Barb

Sundance Jacuzzi Flow SwitchWith transparent tee fitting; fits all 6/99- present 1-pump systems (except 2001–present Capri) 2 Barbed with Box End Connectors without PlugAdditional Details:-Flow Switch with Transparent Tee Fitting-SPST Contact...

Hot Tub Spa 2" Heater or Pump Union Gasket 2 1/2" Lip Balboa Gecko ACC

This part is a Standard 2" Heater or Pump Union Gasket with a 2 1/2" Lip Center to Center. The gasket is 2 7/8" across on the outside the inside diameter is about 2 3/16" and the lip that fits into the union is 2 1/2" center to...