1” PVC Fittings

Tee, 1-1/2"slip x 1-1/2"slip x 1"slip

This part is a Tee, 1-1/2"slip x 1-1/2"slip x 1"slip.. This part will receive into the slip fittings a pipe or fitting on each end that would measure about 1 7/8" Outside Diameter and into the center slip fitting it would receive a pipe or fitting...

Male Pipe Fitting, Adapter, 1" Slip x 1" MPT

This part is a Male Pipe Fitting, Adapter, 1" Slip x 1" Threaded.. The OD of the pipe that glues into this is about 1 1/4".. PVC Pipe Fitting Type Male Pipe Adapter First Plumbing Connection Size 1" First Plumbing Connection Type Slip (s) Second...

Barb Coupling, 90 Ell, 3/4" Barb x 3/4" Spigot/Slip

This part is a Barb Coupling, 90 Ell, 3/4" Barb x 3/4" Spigot/Slip..    Barb Fitting Type 90 deg Barb Adapter Barb Size 3/4" Barb Type Barb (b) Plumbing Connection Size 3/4" Plumbing Connection Type Spigot (spg) Manufacturer ASP

45 Elbow, 1"spg x 1"s

Tee, 2" Slip x 2" Slip x 1" Slip

This part is a PVC Tee, 2"s x 2"s x 1"s.. You can make your connection back to the small side using the below kits..  Connect kit for 1" Soft pipe Click Here.. 1" Connect Kit Connect Kit for 1/2" or 3/4" Soft Pipe Click Here: 1/2" or 3/4" Connect...

Tee, 1" Slip x 1" Slip x 1" Slip

Tee, 1" Slip x 1" Slip x 1" Slip.. 1" Slip measures about 1 1/4" Inside Diameter and receives a 1" pipe that measures about 1 1 /4" Outside Diameter.. (PVC) Plastic Pipe Fittings, Sch 40.     PVC Pipe Fitting...

90 Elbow, 1"s x 1"s

Water Manifold, 1/2" Slip, 4 Port, Transition, 1" Slip

This Manifold is  1" input which measures 1 1/4" Inside Diameter x (4) 1/2" outputs that measure 3/4" Inside Diameter.  Barb/Port Size 1/2" Barb Port Type Slip (s) Number of Ports 4 Manifold Fitting Type Transition Manifold Plumbing...

Barb Adapter, 1"b x 3/4"s-1"spg

Barb Adapter, 3/4" Barb x 1" Slip

This part is a Barb Adapter, 3/4" Barb x 1" Slip.. That means that it will accept 3/4" Inside Diameter Tubing on the barbed side and a 1" Pipe or Fitting that would measure about 1 1/4" Outside Diameter on the slip side.  Barb Fitting Type Barb...

Inside Pipe Extender, 1"spg, Magic Mend

"Magicmend" Pipe extenderSimply cut the bad fitting and remove it from the system. Glue the correct size Magicmend into place and replumb your new fitting

Pipe Insider Connector, 1", Magic Mend, Pipe Repair Fitting

"Magicmend" Insider Connector - Fits inside of 1" pipe which would meausre 1" Inside Diameter and 1 1/4" Outside Diameter.  Why use an additional fitting when you can use a MagicMend® Insider Connector? The MagicMend® Insider Connector will...

Reducer, 1"spg x 3/4"s

This part is a Reducer, 1"spg x 3/4"s.. PVC Pipe Fitting Type Reducer First Plumbing Connection Size 1", 3/4" First Plumbing Connection Type Slip (s), Spigot (spg) Second Plumbing Connection Size 1", 3/4" Second Plumbing Connection...

Reducer, Bushing, 2" Spigot/Street x 1" Slip

Reducer, 2" Spigot or Street x 1" Slip This part is used by gluing it into a 2" fitting which would measure about 2 3/8" Inside Diameter and then you could glue 1" Pipe or fitting inside of the 1" Slip fitting which would measure about 1 1/4" Outside...

Adapter Fitting, 1"spigot x 3/4" barb, 90

This fitting is a 90 degree glue in style spigot x barb. The Spigot side will glue into a 1" fitting that measures about 1 1/4" Inside Diameter and the barb accepts a 3/4" inside diameter hose usually a clear hose. These are usually used on water control...

Reducer, 1"spg x 1/2"s

Reducer, 1-1/2"spg x 1"s

Coupler 1" Slip x 1" Slip PVC

This part is a (1) 1" Slip X 1" Slip Coupler or Coupling PVC Plumbing Fitting. Used to connect two pieces of pipe or a fitting. The Coupler receives a 1" fitting or pipe which measures 1 1/4" OD on one side and then receives a 1" fitting which measures 1...

90, Street Ell, Elbow, 1" Slip x 1" Street/Spigot

This part is a 90, Street Ell,  Elbow, 1" Slip x 1" Street/Spigot.. This part accepts a 1" Pipe or fitting on the slip side that would measure about 1 1/4" Outside Diameter and glues inside of a 1" fitting on the other side that would measure about...