321 results for 201 starite

201 Seal Pump Parts Kit with Silicon Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal, Seal Tool and Silicon that fit Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to seal the seal...

(1) Front Bearing & Seal Pump Parts Kit Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal and (1) Bearing that fit most motors that are mated to Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to...

(2) Front Bearing & Seal Pump Parts Kit Fits Most Vico Sta-Rite Spa Hot Tub Pumps

You are buying a Kit that features (1) PS-201 Seal and (2) Bearings that fit most motors that are mated to Vico, Sta-Rite, Dura-Jet and Power Right Pump Wet Ends and The Professor's Silly Juice to...

Drain Bleeder Plug New Style Pentair StaRite with O-Ring

This item is a 1/4" Air Bleeder Plug with Thin threads that can be found on the New style of a StaRite Dura-Jet DJ Series, Dyna-Glas/Dynamax, ABG, Dyna-Jet, TPE, Some StaRite Pool Multiports, Petair/...

Impeller, StaRite, DuraJet, DJ, 3.0hp, 12.0 Amps

This part is a 3HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0135 cast into the back and will measure about 4 1/8" wide with an eye width of 1 3/4" and a...

Impeller, StaRite, DuraJet, DJ, 2.0hp, 10-11.0 Amps

This part is a 2HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0122 cast into the back and will measure about 3 3/4" wide with an eye width of 1 1 3/4" and a...

How To Video Replacing a 201 Seal Sta-Rite Pump Repair Spa Guy

This video is about The Spa Guy showing How To Replace a Sta-Rite Dura-Jet Pump 201 seal and face o-ring... it is a similar process on all brands... Save

Impeller, StaRite, DuraJet, DJ, 2.5hp, Amp 11.0-12.0

This part is a 2.5HP Sta-Rite DJ Dura-Jet Pump Impeller.. This impeller will usually have the number 17400-0123 cast into the back and will measure about 3 3/4" wide with an eye width of 1 3/4" and a...

Drain Plug Pentair StaRite DuraJet DJ 1/4" Old Style Sta-Rite

This item is a 1/4" Air Bleeder Plug with coarse threads that can be found on the old style of a StaRite Dura-Jet DJ Series Wetends only. The head of this plug will break off and leave the threads in...

Drain Plug, Pentair StaRite IntelliPro

This item is a 1/2" Air Bleeder Plug with Fine threads that can be found on the Newer style of a Sta-Rite Dura-Jet DJ Series Wet ends only.  If you need the O-ring for this plug...

Pump Seal PS-3868 Viton Like a PS-201 (Better) Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal Kit PS-3868 Seal is an Upgraded Better Viton Carbon Graphite Version of the PS-201 Seal used Primarily in Vico & Sta-Rite Wetends.It is 1 3/8" Across the back of the Spring Seal part...

Shaft Seal, PS-1902, 3/4" Shaft, Silicon Carbide PS-201 (BEST) Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal is a (BEST) Silicon Carbide Salt Resistant Upgraded Version of a PS-201 Seal used Primarily in Vico, Sta-Rite and Power Right Wetends. Silicon Carbide’s exceptional wear and chemical...

Shaft Seal, PS-201, 3/4" Shaft, Buna Fits Most Vico, Sta-Rite and Power Right Spa Pumps

This Seal is a PS-201 Seal used Primarily in Vico & Sta-Rite Wet Ends..  It is 1 3/8" Across the back of the Spring Seal part that goes onto the Impeller and the Ceramic & Rubber...

Jacuzzi Bracketless (8) Mount Piranha Pump Seal Parts Kit with Silicon

This part is a Kit that features (1) Seal, Seal Tool and Silicon that fit (8) Mount Style Piranha, Thera-Flo, Thera-Max pumps and The Professor's Silly Juice to seal the seal. It is 1 3/8"...

HydroQuip Pure Heat 2.0 KW 7" Flow Thru Heater, PH201-20UP

HydroQuip Pure Heat 2.0 KW flo-thru heater assembly for use in small spas and some jetted baths. This inline heater is installed on the pressure or discharge side of the pump and maintains heat while...

PS201 Pump Shaft Seal 3/4"

Premium Buna 3/4" shaft seal widely used throughout the pool and spa industry. Vico Models: Ultima, Ultima Plus, Ultimax, Sta-Rite Models: Dura-Jet (DJ), Dyna-Jet...

Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval

This part is an Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval This small oval label fits the Eco-1 4-button panel  Manufacturer HydroQuip Model Eco-1 # of...

HydroQuip Hi-Limit Sensor, For 6100, 7100, 710, 9100, 8400, 8600, 9400, and 9600 systems

Hydroquip Hi-Limit sensor for use with the CS7100, CS6100, CS9300, CS9400 and CS9600 units manufactured prior to mid 2003. If your existing sensor has a letter after 34-0201 (other than K) then this...

Typhoon 5" Dual Swirl Jet, SS/Graphite

Typhoon 5" snap-in Dual Swirl / Twin Roto Jet insert with graphite nozzle and stainless steel scalloped face. This adjustable jet has two nozzles that rotate providing a great hydro therapy massage...

Typhoon 5" Massage Jet, SS/Graphite

Typhoon 5" snap-in Multi-Port Massage jet insert with new and improved graphite nozzle and stainless steel scalloped face. This is the primary replacement for the original 820139 jet. Used industry...

Motor, Ametek, Air Blower Replacement, 1.0hp, 230v, 3.5A

Single speed air blower in 1 HP that can replace virtually all underskirt and some outdoor blowers regardless of brand. We recommend verifying your current motor sizing against the dimensions...

Jet Typhoon 5" Directional SS/Graphite- 5" - Obsolete

This jet is no longer manufactured, but we do have some alternatives available below: Typhoon 5" Dual Swirl Jet, SS/Graphite or Typhoon 5" Massage Jet, SS/GraphiteTyphoon 5" snap-in Directional Jet...

Jet Typhoon Pulsator 5" SS/ Graphite

This jet is in limited supply and once stock has been depleted we will send the dual swirl style 820182. Typhoon 5" snap-in Pulsator Jet insert with graphite nozzle and stainless steel scalloped face...

Motor, Ametek, Air Blower Replacement, 1.5hp, 230v, 4.0A

Single speed air blower in 1.5 HP that can replace virtually all underskirt and some outdoor blowers regardless of brand. We recommend verify your current motors sizing against the dimensions...

Igniter, Pentair Max-E-Therm/MasterTemp, w/Gasket

Igniter for the Sta-Rite Max-E-Therm and MasterTemp gas and electric stand alone heaters. Includes the igniter with two prong AMP style plug and a gasket. Replaces the following part numbers: ...

Light Gray Handle, HydroAir, Waterfall Control Valve, 1"

This item is a Light Gray Handle used on a Waterway Waterfall or Neck Jet control only.. Note: this looks similar to an Air Control Handle but they are different.. The main thing...

Tee, 1" Slip x 1" Slip x 1" Slip

Tee, 1" Slip x 1" Slip x 1" Slip.. 1" Slip measures about 1 1/4" Inside Diameter and receives a 1" pipe that measures about 1 1 /4" Outside Diameter.. (PVC) Plastic Pipe Fittings,...

91693700, Impeller, Gecko AquaFlo FMHP/FMCP/TMCP/, 2.0hp, 3-11/16"diameter

This is a 2HP Impeller for an Aqua-Flo 48 Frame Side or Center Discharge FMHP, FMCP, FMVP, and TMCP Series Wet End 2HP Motor that has about 10.0 Amps on High Speed. This Impeller fits between the...

Stationary Switch, Motor, Some 1 or 2 speed, A.O. Smith, Century, Regal Beloit

This part is a Stationary Switch that fits in the back of some A. O. Smith Motors also Century and Regal Beloit.. This switch is about 2" wide, 2 1/2" Long and 1 3/8" Tall.. Motor Brand  ...

Water Slinger, Pentair StaRite

Wall Fitting, Hydro Air, HAI, Magna Series, 2-5/8" Hole Size, White

This part is a Wall Fitting, Hydro Air, HAI, Magna Series, 2-5/8" Hole Size, White Jet Part Type    Wall FittingManufacturer    HydroAir/BalboaModel  ...

Suction Return Replacement Cover CMP 4-15/16" Diameter 170 gpm Dark Gray Pentair Replacement

This part is a Suction Return Replacement Cover that will replace most Existing G&G or GG Industries or BWG Suction Bodies that use the center screw style mount. This item will fit some other...

Wet End, BWG Dura-Jet 3.0hp 2"mbt 48fr/56fr

Balboa / Sta-Rite Dura-Jet wetend in 3HP. Also known as the DJ this high flow side discharge wetend can be mounted to 48 or 56 frame motors. This side discharge model has 2" unions that will measure...

Lock Washer, Pentair StaRite, #8

Impeller, Sta-Rite, DuraJet DJ, 1.0-1.5hp, 8.0-9.0 Amp at 230V or 16.0 Amps at 115V

This part is an Impeller for a Sta-Rite DuraJet DJ Wet End that would be called 1.0hp-1.5HP, your motor should be 8.0-9.0Amp at 230V or 16.0 Amps at 115V.. The number on the back of the impeller will...

Diverter Assy, Pentair StaRite WC112-148