Product Description
Aqua-Flo Flo-Master XP2 is a side discharge high flowing pump assembly, with 2 speed motor, and genuine 1.0 HP Aqua-Flo wet end. The XP2 has very high head pressure for a 48 frame pump, which translates to great flow rates at a lower operating cost, which = $avings. Easily identified by 8 Phillips head screws in the faceplate with one drain plug. Common to find this pump on many makes and models of spas and hot tubs.
AF-XP2-4810115 Features:
- 1.0 HP (1.5 BHP)
- 115 Volt
- 9.5-10.8 / 2.9 Amps
- 2 speeds (3450/1725)
- 48 Frame
- 2" Unions (3" OD)
Please Note: Power Cords are not included with this pump assembly. You can transfer your original cord to this motor or choose from our selection of cords here.
AKA/Replaces: 06110510-2040B, 06610006-2040
IMPORTANT MOTOR VARIATION NOTICE
Due to ongoing changes in the hot tub pump industry since COVID, motor appearance and configuration may vary, even when the part number is the same. While the pump wet end will be correct, the motor may differ in areas such as capacitor location, labeling, or housing.
If you have a specific motor requirement (clearance, capacitor position, orientation, etc.), you must contact us before ordering so we can verify availability. Do not order first and contact us after delivery due to appearance differences.
Motor variations are outside of our control and may change week to week. Appearance differences do not constitute an incorrect item if specifications are met.
