Sundance Spas Smart Heater 5.5 KW Low Flo, 6500-310

Product Description

Low Flo "Smart" heater used on many Sundance 800, 850 and 880 Series spas from 2000-2007. This low flo heater is mounted vertically next to the control box and is fed by a small low flow circulation pump that has vinyl tubing. Prior to purchase make sure that you check the condition of the gasket that goes in between the control box and heater. That gasket is sold separate and if needed it can be found under Product Code: 6560-049.

AKA/Replaces: SD6500-310, 2-00-0158, E2550-3314 , 6500-301 (Call for details), C3314-1, 26-3314-1-7T-K

6500-310 Features:

• Titanium 5.5 KW (5500 Watts) Element
• 230 Volt 60 Hz (US/Canada)
• 3/4" Barbed inlet and outlet
• Includes Electric Wiring
• Thermal protected

IMPORTANT NOTE: This Smart Heater has a slightly smaller dry well. When installing these heaters into spas manufactured prior to April 2007, you can no longer use the OEM Hi-Limit Sensor since it is too large to fit into the new heater's sensor well. You will need to replace both the Smart Heater and Hi-Limit Sensor, Product Code: SD6600-168 as a set.

Used on Sundance models: 2000-2007 Maxxus, Optima, Cameo, Altamar, Marin, Capri, Majesta and many other models and years

Please Note: Early 2000 models of this heater had a built in circuit board which is no longer used and this heater would be the proper replacement.